A whirlpool bath is a fabulous addition to your bathroom, as it creates a blissful place to relax.
The major downside is that unlike in conventional baths, debris and minerals can quickly collect in the jet nozzles and internal plumbing, affecting the performance of the bath.
Regular whirlpool bath cleaning is essential for a sparkling appearance as well as optimal performance. Whether you want to know how to remove jets for a deep clean or how often to clean your Jacuzzi, this guide has all the information you need.
- Why Clean a Whirlpool Bath?
- How to Clean a Whirlpool Jacuzzi Bath: Step-by-Step Guide
- How to Clean Whirlpool Bath Jets?
- The Best Whirlpool Bath Cleaners to Use
- How Often Should You Clean Your Whirlpool Bath?
Why Clean a Whirlpool Bath?
Although the filtration system in a whirlpool bath can disinfect and keep the circulating water clean, it’s best to clean the bath regularly to maintain a high level of hygiene.
Regular cleaning will also prevent dirt build-up in the jet nozzles, ensuring these contaminants don’t circulate in the bath water and ruin your relaxing bath.
Harmful bacteria that cause skin irritation and rashes can proliferate quickly in the pipes. Hence, it’s vital to clean a whirlpool bath once a month at least to halt microbial growth in the bath’s internal systems.
How to Clean a Whirlpool Jacuzzi Bath: Step-by-Step Guide
1. Prepare the Bath
Before you start the cleaning process, ensure that the bath is free from any stray debris.
Wipe away grime and dirt with a soft cloth or microfibre cloth. Remove hair strands and other residues, and close the drain securely.
Fill the bath with hot water, making certain all jets are below the water surface by at least three inches. The higher the temperature of the water, the better, as most harmful bacteria are killed when water temperature exceeds 60°C (140°F).
2. Choose the Right Cleaning Agent
The right bleach-free, caustic-free cleaner can provide a thorough, hygienic clean and remove residues of soap, oil, grease, limescale, and unpleasant odours from internal pipes.
(Note: Avoid bleach or harsh chemicals, as they can damage the bath or harm users.)
Follow the manufacturer’s instructions and use the specified amount of cleaner. Alternatively, you could add two tablespoons of liquid dishwasher or mild detergent powder.
Stir the water until the cleaning agent is well distributed.
3. Run the Whirlpool Jets
Activate the jets and set them at high speed.
Allow the jets to run for 15–20 minutes. This process will clear any residues and debris from the internal plumbing.
Check the water surface. If you notice a change in colour or any floating debris, it means the cleaning agent is effective.
4. Drain the Water and Rinse the Bath
Drain the dirty water by opening the drain plug. Also, remove any dislodged debris. After the water has fully drained, replace the drain plug.
Refill the bath with warm or cold water. Once again, ensure that all jets are below the water surface by at least three inches.
Run the jets at normal speed for 8–10 minutes to clear out any leftover residues. Finally, drain the bath once more.
5. Clean the Bath Surface
Spray the surface cleaner liquid directly onto the bath surface and interior, focusing on places with visible stains. Wipe clean with a soft, damp cloth.
Alternatively, you could sprinkle baking soda liberally over the bath surface and interior. Let it sit for a few minutes.
Using a clean, dry cloth, scrub the bath’s surface gently in circular motions. Use an old toothbrush to clean the area around the jets and the jet nozzles.
Clean the bath taps and waterline, as well. These areas can also accumulate soap scum and dirt.
6. Rinse and Dry
Fill the bath with cold water. Allow the water to stand for about 5 minutes, and then drain it.
Wipe the bath’s exterior and interior surfaces clean with a dry microfibre cloth to remove water spots.
The clean bath is now ready for your next use.
How to Clean Whirlpool Bath Jets?
You have to remove the jets first.
Start with checking the jet type. Older model jets are typically snap-in, while more recent ones are twist-off.
The older model jets fit inside the recessed holes in the internal shell of the bath. You have to push in a small, flathead screwdriver between the jet and the housing washer.
Apply some pressure, prise out the jet gently, and remove it.
Use a jet removal tool to remove newer model jets. To loosen the jet, push the tool into the jet and apply steady pressure. Turn the tool counterclockwise and pull out the jet gently.
After removing the jet, clean it in hot, soapy water. Once the jet is free from dirt and debris, dry it using a paper towel.
Then, place the jet back into the hole and press it in. It will click into place.
Follow the same process for cleaning the remaining jets.
Useful Tips to Maintain the Jets After Each Use
The jets in a whirlpool bath are not self-cleaning. So, you must ensure that each jet is free from debris and the nozzles are free from blockages due to dirt and grime build-up.
Clean the nozzles with an old toothbrush and rinse the jets with water. Drain the water from the bath and wipe it with a clean, dry cloth.
The Best Whirlpool Bath Cleaners to Use
Regular Cleaner Products
1. ULTIMA-PLUS XP Hot Tub and Whirlpool System Flush: This powerful internal pipework cleaner removes dirt, grime, and nasty odours, ensuring the pipes are clean and clear.
2. Pro-Kleen Whirlpool Bath Internal Pipe Cleaner: This potent formula clears the accumulated body oils, grime, and biofilm from your bath’s pipework, prolonging the life of your unit.
3. ClearSpa Hot Tub Flush Cleaner: This quick-acting cleaner breaks down and clears biofilm buildup, dirt, debris, oils, and unpleasant odours from the internal pipes of your whirlpool bath.
Natural Cleaners
1. Baking Soda: This versatile cleaner is a miracle worker if you’re looking for a mild cleaning solution. You can mix it with water and scrub away the most stubborn bit of scum.
2. White Vinegar: This excellent cleaning agent can get rid of tough stains on the interior and exterior of your whirlpool bath.
3. Rubbing Alcohol: Effective for cleaning the stainless steel and chrome fixtures in your whirlpool bath. The alcohol content must be at least 90 percent.
How Often Should You Clean Your Whirlpool Bath?
The cleaning frequency is dependent on usage and personal choice. For instance, if two people use the whirlpool bath three times a week, then cleaning it once a fortnight would be ideal. But if two people use the bath only once a week, then it needs to be cleaned only once a month.
In addition to the regular fortnightly or monthly clean, your whirlpool bath definitely needs a deep clean once in three months. This will ensure that the jets operate at their best.
Summary
Keeping the jets and internal plumbing of your bath bacteria-free can seem challenging. But without excellent hygiene, the same water jets that deliver a pleasurable experience could harbour harmful bacteria, including dangerous microbes that could make you sick.
You can’t afford to compromise on cleaning your whirlpool bath regularly and ensuring it’s safe to use. The good news is keeping your whirlpool bath in pristine condition should be easy if you follow the tips given here.
Shop Whirlpool Jacuzzi Baths
At Bathroom City, we have an exclusive selection of whirlpool baths – right from ultra-sophisticated to luxury and from premium down to affordable.
The choice is truly vast – double-ended wide bath, space-saver corner bath, single-ended straight bath, petite small spa bath, L-shaped bath, P-shaped bath, and more. Explore our whirlpool bath collection today and renovate your bathroom.
Other related articles you might also like to read: